BLOG

Suitable for metal slitting machine, slitting machine blade axial locking; Disc shears are locked with cutter chuck. Tool chuck locks. The molding shaft is fastened with tools and fixtures Fastening fixture for molding processing; Other shaft tool fastening fixture. How it works: SL-Nut hydraulic nut is a high-tech product of our company, and its working principle is to use a simple "T-handle" to rotate the "pressure screw" to press the "pressure piston". At this time, the sealing pressure increases to extrude the "ring piston" and thus tighten the rotating tool (washer, tool, etc.). At the same time, it can be confirmed whether the scale of the "thrust indicator" is the specified thrust value. Advantages of SL-Nut Hydraulic lock nuts: The body is aluminum titanium alloy, replacing foreign first-line brand products. Surface knurled, light weight, using a specific wrench, easy to install and disassemble. The axial locking force is large, and the blade is firmly locked on the slitting machine, without deformation under axial pressure Reduce the wear of the blade, extend the life of the blade, shorten the knife time, improve the use efficiency of the equipment, and the strip plate is small burr No need to refuel, axial force stability, good sealing, no oil leakage Sealed grease type, no outward pressure Use a small amount of grease for best results, clean and environmentally friendly According to customer requirements, screw, non-thread hydraulic nuts.